credit: Anschutz North America
NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#2 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
...this is the 'problem' of existing hammer spring cap ...
TBH, don't know which tool or key is used to fine tune this
Anybody have an idea ?
TBH, don't know which tool or key is used to fine tune this
Anybody have an idea ?
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- Alpazen
- Go to Rifle: Feinwerkbau 800
- Country: France
- Where: Lac Léman
Post
#3 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
A special tool like this :
Or you drilling a second hole and use a srewdriver with U :
Or you drilling a second hole and use a srewdriver with U :
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#4 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
Thanks !
Where to buy that "special tool" ?
I wonder how much those Hex caps cost from Anschutz... if less than Euro10 perhaps that's perhaps easier to order a bag or two
Where to buy that "special tool" ?
I wonder how much those Hex caps cost from Anschutz... if less than Euro10 perhaps that's perhaps easier to order a bag or two
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- Alpazen
- Go to Rifle: Feinwerkbau 800
- Country: France
- Where: Lac Léman
Post
#5 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
I think that is not possible to buy directly in a shop..
It must be custom made
And for sure, buy the Anschutz Hex caps is the best solution
It must be custom made
And for sure, buy the Anschutz Hex caps is the best solution
- Sven
- Contact:
- Go to Rifle: Anschutz, Walther, ATOM
- Country: The Netherlands
- Where: Arnhem
Post
I don't now the price, but it must be much cheaper the use a hacksaw on the adjuster screw to make a slit.
This the original Anschutz tool for hammer spring adjustment. The part number is on the bag.
#6 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
I don't now the price, but it must be much cheaper the use a hacksaw on the adjuster screw to make a slit.
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#7 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
My thinking Sven as is yours done that way.
Why bother with a tool or even change the power adjuster for another and have no access unless remove from stock = stupid idea.
All mine well over 100 have hacksaw slots in rear.
Why bother with a tool or even change the power adjuster for another and have no access unless remove from stock = stupid idea.
All mine well over 100 have hacksaw slots in rear.
If a jobs worth doing, do it right or not at all.
- H725
- Go to Rifle: Anschütz
- Country: Germany
- Where: Berlin
Post
#8 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
I have this screw from a dealer. It is a new accessory directly from Anschütz.
- glr59
- Go to Rifle: Crosman, Daystate, Anschutz, Steyr, FWB.
- Country: United States
- Where: Liverpool
Post
#9 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
Do you have a part number ?
Thank you
Jerry
Thank you
Jerry
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
As mentioned in post #6
013992
#10 Re: NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment
As mentioned in post #6
013992
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
Who is online
Users browsing this forum: No registered users and 1 guest