Perhaps I don't see this in the forum, sorry by advance
Is anyone know in Europe a manufacturer for only the laminated wood for made myself a special stock for field target
I see one but in USA : http://www.rifle-stocks.com/laminated_woods.htm
Thanks to all..
Cheers
Laminated wood for made my FT stock
- Alpazen
- Go to Rifle: Feinwerkbau 800
- Country: France
- Where: Lac Léman
- Hot pellet
- Go to Rifle: JH Anschutz
- Country: Spain
- Where: Ajofrín (Toledo)
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#3 Re: Laminated wood for made my FT stock
Those guys are rubbish (rifle-stocks.com) ...contacted them years ago ; I also think they will NOT send to Europe.
Laminate blanks from: https://www.cwp-usa.com/collections/spectraply-blanks and they mail them to Europe (now prohibitive crazy/stupid pricing)
LAMINATES on this forum > http://pimpmyairgun.com/viewforum.php?f=125
PS: I used to order from Boyds individual blanks with certain width thickness, until they changed the rectangle blank into a contoured rifle shape...see here: http://www.boydsgunstocks.com/Products/supplies ...they also never reply to emails..
Laminate blanks from: https://www.cwp-usa.com/collections/spectraply-blanks and they mail them to Europe (now prohibitive crazy/stupid pricing)
LAMINATES on this forum > http://pimpmyairgun.com/viewforum.php?f=125
PS: I used to order from Boyds individual blanks with certain width thickness, until they changed the rectangle blank into a contoured rifle shape...see here: http://www.boydsgunstocks.com/Products/supplies ...they also never reply to emails..
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- Alpazen
- Go to Rifle: Feinwerkbau 800
- Country: France
- Where: Lac Léman
Post
#4 Re: Laminated wood for made my FT stock
Many many thanks my friends
I'll see with the manufacturer in Finland..
I'll see with the manufacturer in Finland..
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#5 Re: Laminated wood for made my FT stock
Used to buy semi inletted CZ 550 stocks from Richards Microfit as far back as 2002. Constant failure to reply by email in fact never had a reply in 14 years. Had to stop over at work and phone up, was better with the old switchboard likely to speak to a real person that could take the order.
Problem there is the blank size useless for any FT style stock unless make a pigs ear of it plus having to adapt a butt length adjuster to make up desirable length needed. Only have 12" butt to pistol grip.
Finland stuff never knowingly seen any in real life, glues waterproof but is it what the early Steyrs used and split open in weather?
On other hand a more usable size and can sink action down in to the wood.
Theres a minimum order of planks for a chosen colour scheme and not many nice ones to choose from stock items, colours look pastel rather than the Rutland Ply vibrant colours in Richards Microfit.
Boyds will ship, total order including shipping not to exceed around $100 and think shippings more than $40. Wont get an FT style stock out of their cut blank sizes with rear of cheek angled off, more so if a European action that needs setting down.
Best quality stuff same as Richards its water proof. Since Rutland Ply burnt down some years back these producers are still selling the same colour blanks, wonder if someone has setup.
Tried every dealer of Cousineau and producer lucky if you get an email reply 1 in 3 times, those that do your greeted with we don't ship outside USA.
Its also something I am working on in conjunction with a fellow club member, watch this space.
Problem there is the blank size useless for any FT style stock unless make a pigs ear of it plus having to adapt a butt length adjuster to make up desirable length needed. Only have 12" butt to pistol grip.
Finland stuff never knowingly seen any in real life, glues waterproof but is it what the early Steyrs used and split open in weather?
On other hand a more usable size and can sink action down in to the wood.
Theres a minimum order of planks for a chosen colour scheme and not many nice ones to choose from stock items, colours look pastel rather than the Rutland Ply vibrant colours in Richards Microfit.
Boyds will ship, total order including shipping not to exceed around $100 and think shippings more than $40. Wont get an FT style stock out of their cut blank sizes with rear of cheek angled off, more so if a European action that needs setting down.
Best quality stuff same as Richards its water proof. Since Rutland Ply burnt down some years back these producers are still selling the same colour blanks, wonder if someone has setup.
Tried every dealer of Cousineau and producer lucky if you get an email reply 1 in 3 times, those that do your greeted with we don't ship outside USA.
Its also something I am working on in conjunction with a fellow club member, watch this space.
If a jobs worth doing, do it right or not at all.
Who is online
Users browsing this forum: No registered users and 0 guests