Burris Eliminator III: 4-16X50

[AdminMASTER]

http://www.burrisoptics.com/laserscope.html" onclick="window.open(this.href);return false;

Manual: http://www.burrisoptics.com/Eliminator% ... Manual.pdf" onclick="window.open(this.href);return false;

Price List: http://www.burrisoptics.com/pricelist_scope.html" onclick="window.open(this.href);return false;

USD$2413 / GBP1527 / Euro1805

... I'll check it out at IWA

----------------------------------------------------------------------

The New Eliminator III with X96 reticle technology empowers the rifleman with even more accuracy, more range, and a method of windage compensation that is now perfected AT ANY MAGNIFICATION. With the Eliminator III, you can accurately range and hit targets out to 1,200+ yards due to its enhanced ballistic programming that incorporates both the Drop Number and Ballistic Coefficient of the cartridge and load you are shooting. Combined with the new X96 reticle that offers a convenient and accurate method for determining hold-off for wind at longer ranges, the Eliminator III delivers extreme accuracy at extreme ranges.

• 1200+ Yards
• Accurate at ANY Magnification
• New Ergonomic Activation Buttons
• Enhanced Extreme Range Ballistic Programming
• Sleek, New Design
• Parallax Adjustment 50 yd. to Infinity

Simple Operation & Programming
At the press of a button, you enter the Drop Number and Ballistic Coefficient appropriate for your ammunition. This data is available in the Cartridge List (1,500+ Specific Loads) provided by Burris or from just about any ballistics software program.

Range Compensation
To range, place the cross hair on your target and press either button on the objective bell. In less than a second, the range to your target and a lighted dot will appear indicating the correct aiming point for your specific ammunition for the distance to the target.

Windage Compensation Innovation
The X96 reticle provides a convenient and accurate METHOD to more easily compensate for wind. However, complete wind compensation is NOT fully automated within the scope. It still requires some thinking on the part of the shooter. In addition to distance, the digital display will show a 10 MPH Wind Value for your specific cartridge at the indicated range to your target. This is a “Dot Value” that corresponds to the dots on each side of the reticle’s vertical post. These dots let the shooter precisely hold into the wind. The shooter still needs to estimate the cross-wind and convert the 10MPH Wind Value displayed to the appropriate value for the estimated actual MPH cross-wind value. The shooter then holds into the wind using the appropriate “Dot Value” as shown in the examples below.

Specifications
4x-16x-50mm #200116
Laser Range* (yards reflective): 1200+
Laser Range* (yards deer): 750+
Laser Accuracy: +/- 1 yard
Battery: CR2
Battery Life: 5000 cycles
Operating Temperature: -15F to 140 F
Field of View: 25-7
(Low-High feet @ 100 yards)
Adjustable Parallax (yards): 50 - inifinity
Exit Pupil (mm) Low - High: 12.5-3.1
Click Value (Inch @ 100 yards) : 1/4 MOA
Maximum Adjustment: 40MOA
Weight with mount & battery: 26 oz.
Optimum Eye Relief (Inch): 3.5 - 4.0
Objective End Dia (mm): 65.5
Clear Objective Dia (mm): 50
Ocular End Dia (mm): 39
Overall Length (Inch): 15.75
Mounting Rail Length (Inch): 8.5
Torque Spec. for Mounting Bolts: 40-80 in.-lb.
*Environmental conditions may limit range