Contact Details - Lothar Walther

[AdminMASTER]

Lothar Walther
Postfach 1125
D-89551 Königsbronn
GERMANY

Tel.: + 49 (0) 7328 96300
Fax: + 49 (0) 7328 5066

eMail: info@lothar-walther.de
Web: http://www.lothar-walther.de

Airgun Barrels >>> http://www.lothar-walther.de/163.php <<<<

_______________________________________________________

LOTHAR WALTHER Precision Tool Inc.
3425 Hutchinson Rd.
GA 30040 Cumming
USA

Tel.: +1 770 889 9998
_______________________________________________________

T.W.Chambers & Co (Gun & Riflemakers)
PO Box 5745
Dingwall Ross-Shire IV16 9WF
Scotland

Tel.: +44 (0) 1349 832 974
Fax.: +44 (0) 1349 830 498

Web: http://www.gunspares.co.uk

0.177 >> https://www.gunspares.co.uk/products/24911/177-45mm/
0.20 >> https://www.gunspares.co.uk/products/24912/20-5mm/
0.22 >> https://www.gunspares.co.uk/products/24913/22-55mm/

eMail: sales(AT)gunspares.co.uk

[AdminMASTER]

Update: Special Rifle Steel and Stainless Steel - wonder what's the difference in steel quality and whether it affects accuracy (probably not - probably 1 grade is cheaper than the other)

credit: http://www.lothar-walther.de/pdf/Katalo ... 7_2_en.pdf

>> http://www.lothar-walther.de/163.php

[Alpazen]

Anyone know if it's possible to order the "Match" grade of these barrels

[andrew27473]

I've just fitted 1 on my Raw BM500 which I picked up from Ebay and shots really well despite the fact I've never machined a barrel blank before.

Here's the link.
https://m.ebay.co.uk/itm/A-177-Lothar-W ... Swgv5ZRorC

[AdminMASTER]

Tanks for the link Andrew

The eBay seller has MEGA good ratings for sure...

Who is this guy Anyone know him ? Vouch for him ? his address & contact details are on eBay ...

slug-gun
Christopher Thrale
13 Ranelagh Road
Hemel Hempstead
Hertfordshire
HP2 4RU
United Kingdom

Phone: 07761|618977
Email:chris.thrale@hotmail.co.uk

NB: the order note is for 20 pieces...but he says he's got 60, as follows:

"You are bidding for an as new .177 calibre Lothar WALTHER match grade, with choke, air rifle barrel BLANK, which has a length of 605mm and a diameter of 16mm.

This very high quality unit was one of 60 such blanks bought by Pax Guns of London for an air rifle project that ultimately did not come to fruition, therefore the blanks have remained unused in their original packaging, as received from Walther on 18.10.2013.

A photos shows a copy of the Delivery note and Guarantee sheet as received with the order.

They are NOT a component part as they obviously will require machine work to enable fitting to any particular air rifle or air gun.

These blanks were bought for use on a high end air rifle and are therefore of MATCH grade, and as such entirely suitable for any air rifle upgrade or re-barrelling project."

[AdminMASTER]

Lothar Walther blanks are usually stamped as well...or are some not

>> https://www.db-schietsport.nl/en/access ... r-walther/

Not sure now ...Mmmm...

[AdminMASTER]

Emailed Phoenix Airguns to confirm they recognize the 2013 order, and flogging off of 60 barrel blanks..

> http://www.paxguns.co.uk/about.htm > http://www.phoenixairguns.co.uk/

Pax Guns Ltd.
166 Archway Road
Highgate
London
N6 5BB
Tel: (+44) 20 8340 3039
email: paxguns@btconnect.com

> https://beta.companieshouse.gov.uk/comp ... nt-control

Lets sit back & hopefully await confirm...

[andrew27473]

The cut off I have here is stamped 5 luft at the top and C at the bottom.Walther only stamp the breach end not the crown end which you can see in the picture . I'd post a picture but my phone won't let me.
When I ordered my blank from him he rang to check my address as part if it was not on my PayPal account.

[AdminMASTER]

OK

Sounds promising

Thanks for confirming stamp marks ...

[Lol Moore]

I can confirm these blanks are good quality, I got a 0.177 one and have just cut breech and crown to suit a Steyr LG110 and managed to get 30 or so shots through at the end of today.

OD is 16.03 so had to sleeve breech end as Steyr action is 16.28 - fits sweet.

For the limited distance I can see down the barrel the rifling is very well defined and clean cut. It does look internally a better finish than another LW barrel I have so may be of some "match quality", I've always took these descriptions with a pinch of salt.

The choke is around 0.06mm smaller than breech and its about 30mm long. Pushed a few pellets through and there are no tight spots (except choke ) and the rifling marks on pellet head and tail look very good.

It was breezy but managed a couple of single hole groups at 35 yards, will give it a good shoot tomorrow.

I have ordered another for stock