Courtesy of other UK Guru - Mick Tromans > viewtopic.php?f=213&t=280
Email: "...A few photos of your new Ataman, bored out the A frame it's clear of the carbon tube..."
Ataman Field Target - Carbon & Titanium PIMPED !
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#2 Re: Ataman Field Target - Carbon & Titanium PIMPED !
credit: https://www.facebook.com/pg/Field-Targe ... e_internal
different mod. - carbon sleeved but no titanium air cylinder...
different mod. - carbon sleeved but no titanium air cylinder...
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#3 Re: Ataman Field Target - Carbon & Titanium PIMPED !
Some High Res close ups of Titanium & Carbon sleeve by Mick Tromans
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#4 Re: Ataman Field Target - Carbon & Titanium PIMPED !
Thinking of adding a Weaver to Dovetail adapter as previously posted...or simply getting one of these risers...
So, I've measured with wife's sewing tape (couldnt find a ruler in the house ) and thus dimensions are Approximate
Breech block length : 17cm
Breech block width: 2.5cm
Forward top picatinny: 5.5cm
Breech: 3.5cm
Rear top picatinny: 8 cm
Am thinking of either:
#1 http://www.tacticalscope.co.uk/leapers- ... 3940-p.asp
Riser Mount, 0.75" (19mm) Height, 5.5" (140mm) long
#2 http://www.tacticalscope.co.uk/leapers- ... 3943-p.asp
Riser Mount, 0.83" (21mm) Height, 5.5" (140mm) long
So, I've measured with wife's sewing tape (couldnt find a ruler in the house ) and thus dimensions are Approximate
Breech block length : 17cm
Breech block width: 2.5cm
Forward top picatinny: 5.5cm
Breech: 3.5cm
Rear top picatinny: 8 cm
Am thinking of either:
#1 http://www.tacticalscope.co.uk/leapers- ... 3940-p.asp
Riser Mount, 0.75" (19mm) Height, 5.5" (140mm) long
#2 http://www.tacticalscope.co.uk/leapers- ... 3943-p.asp
Riser Mount, 0.83" (21mm) Height, 5.5" (140mm) long
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#5 Re: Ataman Field Target - Carbon & Titanium PIMPED !
Both them Leepers are weaver to weaver.
Picatinny conforms to a standard MOD 1913, Stanag goes a stage further for European specs.
Picatinny conforms to a standard MOD 1913, Stanag goes a stage further for European specs.
If a jobs worth doing, do it right or not at all.
Who is online
Users browsing this forum: No registered users and 0 guests