Carbon Composite Buddy Bottles
- BenGun
- Go to Rifle: ISP,Pardini,Feinwerk
- Country: UK
- Where: Ramsgate
Post
#1 Carbon Composite Buddy Bottles
Anyone know where we can get Carbon Composite buddy bottles from in the UK ?, especial the smaller 3Ltr or below .
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#2 Re: Carbon Composite Buddy Bottles
Search "Carbon Fiber Air Tank" revealed UK Paintball community use them: PRESTO ! >>> http://www.rap4uk.com/Paintball-Carbon- ... s/2241.htm
4500 psi = 310 bar
WARNING ! ...with any high pressure stuff
read this > http://www.airgunbbs.com/showthread.php ... -Air-Tanks
" If output pressure is only 800 - 850 psi its probably for CO2 as that is what CO2 pressure guns run at. If you want higher pressure you need to buy bottle with higher output reg: in top of bottle IE: 1200, 1500, 1800, 2000 ect or buy new reg only - these can be bought from UK but are very pricey, cheaper from abroad.
To connect to rifle you need a curly hose can be bought from internet or paintball shop ; if from shop check max operating pressure. Some have max of only 5000 psi, I use the higher pressure one's which are 8000 psi. The bottles should have burst discs which let pressure go before it can blow bottle or your gun up for saftey. I have used above setup for over 3 years now without any problems. If you are near Barnet any time send me a PM and I will show you how I setup my system."
So read, read and read & research, create a saftey check list for the components you want to assemble, ask questions...then buy in confidence.
Damn good read this , re: Carbon Fibre tanks > http://www.airtanksforsale.com/
4500 psi = 310 bar
WARNING ! ...with any high pressure stuff
read this > http://www.airgunbbs.com/showthread.php ... -Air-Tanks
" If output pressure is only 800 - 850 psi its probably for CO2 as that is what CO2 pressure guns run at. If you want higher pressure you need to buy bottle with higher output reg: in top of bottle IE: 1200, 1500, 1800, 2000 ect or buy new reg only - these can be bought from UK but are very pricey, cheaper from abroad.
To connect to rifle you need a curly hose can be bought from internet or paintball shop ; if from shop check max operating pressure. Some have max of only 5000 psi, I use the higher pressure one's which are 8000 psi. The bottles should have burst discs which let pressure go before it can blow bottle or your gun up for saftey. I have used above setup for over 3 years now without any problems. If you are near Barnet any time send me a PM and I will show you how I setup my system."
So read, read and read & research, create a saftey check list for the components you want to assemble, ask questions...then buy in confidence.
Damn good read this , re: Carbon Fibre tanks > http://www.airtanksforsale.com/
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
Who is online
Users browsing this forum: No registered users and 0 guests