EXCLUSIVE ! - "Trotanium" LG400 16Joules PIMP !

[Jon]

He does a good job and only uses titanium throughout, no aluminium end plugs.

I believe this rifle may be for sale at the right price.

[Trotaniuman]

Latest pctures of my LG400 16 Joules PIMP!

[AdminMASTER]

Nice one Mick

[Jon]

Shoots very good for a Walther, Mick must have spent ages getting it to shoot that way on par with the best LG200/300 out there, credit where its due.

Pellets don't flip, rotate or go in on the pi.. in to barrel taper because he has sleeved the loading channel.

[AdminMASTER]

Credit: page 3 > http://www.airguns.ee/gallery/#/c/voist ... C_stage_2/


This Estonian chap - Aaron Jalakas seems non bothered about pellet feed...as Sven said, perhaps Walther has modded the pellet channel on the more current LG400 ?

[Jon]

Theres a press release video around some where I cant find. It shows the probe entering the skirt on a match pellet and lifting it clear of the channel around 1mm, meaning it has to be at least 6.5mm diameter feeding in to a sharp taped barrel.

Since channel is massive (too big for a .22) all the same no change since inception pellets sit 1mm lower. Probe enters back of a diabolo and lifts the rear whilst the front glides on its domed head before flipping over, guaranteed 4 out of 5 with 7.9gr and very very annoying with 8.4gr having to tilt rifle upwards whilst carefully nudging the pellet forward looking at pellet going in. Many a time 8.4gr have wedged side on entering barrel.
Of course at 6.5 dia a 7.9gr sits side on in the trough with room to spare. 8.4gr sit easily in the trough 90 degree on as well.
Too much trouble for others, Mick done it right.

As said before Europeans are not bothered they put up with it, we Brits wouldn't tolerate.
Anyone that knows something about Walthers will notice straight away 2 areas of concern but know of two others the way its done.

Yours is leaps better than the original and BSA barrel once pellets stat entering.

[Trotaniuman]

I would be very surprised if Walther have modified the pellet channel on these . Just like to point out that
the mod I did on this wasn't just the about pellet channel. Pellet channel mod was quite a simple mod a piece of brass tube from B&Q