...from an owner in the USA..
"...It also is only 1 of 5 that have an Anschutz 5065 trigger unit..."
----------------------------------
Anschutz 5065 Trigger ?
It's this > http://www.schiesssport-buinger.de/shoo ... 065-A-100g
worth a whopping Euro400 or GBP £350 by itself...
Thomas FT - New Styling
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#2 Re: Thomas FT - New Styling
had some feedback from the man about the titatnium...
...The titanium I use is cold worked stress relieved 3Al-2.5V. 1.5" OD... .087" wal
...The titanium I use is cold worked stress relieved 3Al-2.5V. 1.5" OD... .087" wal
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#3 Re: Thomas FT - New Styling
Great trigger on par with Walthers, Feinwerkbaus and the older two Anchutz triggers.
Above trigger is the old unit fitted to 8001, 8002 and 9003 from 2004 to mid 2015, latest is the 4 ball bearing type.
Above trigger is the old unit fitted to 8001, 8002 and 9003 from 2004 to mid 2015, latest is the 4 ball bearing type.
If a jobs worth doing, do it right or not at all.
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#4 Re: Thomas FT - New Styling
credit: https://www.facebook.com/thomasrifles/?fref=nf
"...New 2 stage trigger. Fully machined housing, all ball bearing, hardened and ground internals. Adjustable first and second stage tension and first stage travel. Designed to be a direct replacement for the older triggers. No spring to drag the sear on the striker. Reset is done by fulcrum action from the rear of the striker."
"...New 2 stage trigger. Fully machined housing, all ball bearing, hardened and ground internals. Adjustable first and second stage tension and first stage travel. Designed to be a direct replacement for the older triggers. No spring to drag the sear on the striker. Reset is done by fulcrum action from the rear of the striker."
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#5 Re: Thomas FT - New Styling
Any more piccies of the new trigger, especially the other side.
If a jobs worth doing, do it right or not at all.
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#6 Re: Thomas FT - New Styling
credit: mark404 (USA)
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Who is online
Users browsing this forum: No registered users and 4 guests