Page 1 of 1

#1 JH ANSCHUTZ 9015 CLUB

Posted: Mon Feb 06, 2017 10:50 pm
by Jon
Advanced preview released at British Shooting Show 10 February 2017, can be seen and shot on the Ruag test stand.

This is the base Anchutz model, stock owes customer nothing, in fact sell the adjusters and T slot rail off and be £70 richer than buying action only. It don't end there, have flimsy rifle case and decent tool kit to boot plus sight set to sell at least £150 (£220 better off).

All the 9015 actions are the same, its just the stock that determines final price.
This is a modular rifle that items can be added as and when necessary therefore not throwing away bought items that come as standard.

Actions and barrels will vary one to the next this one gets 118 shots at 783ft/sec, though only need 60 shots in reality.
Result of extensive testing and knowledge the last 19 years with Anchutz, valving now on revision 7 has been changed and modded like all others done to date, stable -4 degrees to 93 degrees. Original valving will see 25ft/sec from room temp to 93 degrees excluding what happens when gets cold.
Carries legit UK 12 month guarantee with Ruag and the only authorised UK convertor.

In all its the culmination of 26 years, 19 years with Anchutz and having used one from 2005 for 8 1/2 years rain, sleet or shine 3 times a week uncleaned, abused and not touched week in week out they are bullet proof nothing to break.
The only breakages known on these are the stabilisor sears with the power mod done else where.

Consider a premium rifle ready to go out the box sorted and tested independently before sale, quick fill, fluted dust cap and better end plug, shortened barrel sleeve and power mod way above any so called blueprint from £1500.
Better butt pad and palm shelf can be added about £250 total £1750! as and when required along with a rail for FT circa £85. If need to go further junk the stock it owes nothing and have a stock made.
Either way its a winner whether HFT, BR or FT.

#2 Re: JH ANCHUTZ 9015 CLUB

Posted: Tue Feb 07, 2017 9:09 pm
by AdminMASTER
Congrats Jon !

I suggest you actually mark all of these with an engraved "JH 000XXX-2017" or something along those lines...

Collectors and the like can then vouch they own a genuine JH modded 9015.

#3 Re: JH ANCHUTZ 9015 CLUB

Posted: Tue Feb 07, 2017 9:31 pm
by Jon
Anschutz to date no and wont be able to tell the difference from 6J and 12ft/lb without taking apart.

All the Fens are numbered 1-28 though some have been tatted with and cant put metal back on!

#4 Re: JH ANCHUTZ 9015 CLUB

Posted: Sat Feb 11, 2017 9:22 pm
by Matt
Was good to get Jon to meet Anschutz yesterday, though I must admit I nearly fell asleep when they were discussing engineering stuff but Jon seemed to come alive with it.

Got to see something interesting which will be launched at iwa this year, hopefully we can work something out with them on that.

Both the club and one were well received, now it's time to move the project on further, hopefully got some help lined up for Jon I can now leave the project in his hands.


Matt

#5 Re: JH ANCHUTZ 9015 CLUB

Posted: Sun Feb 12, 2017 8:27 pm
by Jon
Many thanks for the past 5 years bringing these daunting projects together and look forward to working with Anschutz in the future.

Safe to say the two Anschutz honchos saw reasons for doing things in certain ways and will be filtering through. By that I now firmly believe Anschutz are going places again that slid away the last few years, good things are to come rest assured.

#6 Re: JH ANSCHUTZ 9015 CLUB

Posted: Wed Oct 11, 2017 7:45 pm
by AdminMASTER
...this one belongs to a guy who stripped the lacquer & oiled the laminate...

#7 Re: JH ANSCHUTZ 9015 CLUB

Posted: Wed Oct 11, 2017 8:18 pm
by Jon
It lives down Devon, owner writes for several magazines including online.
Think theres a review in last months online mag Comp Air, not seen it.