NEW ! - Anschutz Hex Key Hammer Spring Cap - Velocity adjustment

[AdminMASTER]

credit: Anschutz North America

[AdminMASTER]

...this is the 'problem' of existing hammer spring cap ...

TBH, don't know which tool or key is used to fine tune this

Anybody have an idea ?

[Alpazen]

A special tool like this :

Or you drilling a second hole and use a srewdriver with U :

[AdminMASTER]

Thanks !

Where to buy that "special tool" ?

I wonder how much those Hex caps cost from Anschutz... if less than Euro10 perhaps that's perhaps easier to order a bag or two

[Alpazen]

I think that is not possible to buy directly in a shop..

It must be custom made

And for sure, buy the Anschutz Hex caps is the best solution

[Sven]

Part #013992

This the original Anschutz tool for hammer spring adjustment. The part number is on the bag.

I don't now the price, but it must be much cheaper the use a hacksaw on the adjuster screw to make a slit.

[Jon]

My thinking Sven as is yours done that way.
Why bother with a tool or even change the power adjuster for another and have no access unless remove from stock = stupid idea.

All mine well over 100 have hacksaw slots in rear.

[H725]

I have this screw from a dealer. It is a new accessory directly from Anschütz.

[glr59]

Do you have a part number ?

Thank you

Jerry

[AdminMASTER]

Do you have a part number ?

Thank you

Jerry

As mentioned in post #6

013992