Thought I better post pics before anyone else does it.
14mm high rail fixed off front block, all other mods as per the fully blown FT except cheek raiser.
P800 HFT
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#2 Re: P800 HFT
Whoa ! Nice one Jon !
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
- Steve
- Go to Rifle: Walther
- Country: Uk
- Where: Bolton
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#4 Re: P800 HFT
Steve you can look out the weekend checked it over still spot on.
Rail didn't need to be so long but left as is.
Rail didn't need to be so long but left as is.
If a jobs worth doing, do it right or not at all.
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#5 Re: P800 HFT
...just to make Note to Self: This was the 2nd purchase I made from FT chap (name I forget).. - to fit action on Fwb 800 Alu > viewtopic.php?f=82&t=1391
Project for this 2nd gun:
1. Hamster alu or titanium risers - keeping existing benchrest wood, which I have reversed back to front as it's in line & better looking this way (IMHO)
2. Titanium air cylinder w. Quick fill
3. Black anodised action block
...and more...much more
NB: Just to let people know, Fwb stocks are somewhat "Modular" meaning I could simply swap the rear from the R/H Fwb800 Alu, onto the rear chassis stock of the Fwb800X (since that was a left hander)...and that would make it look/feel like a new "hybrid" unique air rifle
...and going further...I could add the rear alu P700 butt to the P800 Alu , and vice versa. All jolly good !
Project for this 2nd gun:
1. Hamster alu or titanium risers - keeping existing benchrest wood, which I have reversed back to front as it's in line & better looking this way (IMHO)
2. Titanium air cylinder w. Quick fill
3. Black anodised action block
...and more...much more
NB: Just to let people know, Fwb stocks are somewhat "Modular" meaning I could simply swap the rear from the R/H Fwb800 Alu, onto the rear chassis stock of the Fwb800X (since that was a left hander)...and that would make it look/feel like a new "hybrid" unique air rifle
...and going further...I could add the rear alu P700 butt to the P800 Alu , and vice versa. All jolly good !
- Attachments
-
- DSC_0327.JPG (16.6 KiB) Viewed 1857 times
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
Who is online
Users browsing this forum: No registered users and 1 guest