Fwb 800 X (10m / 7.5J Model) - Clean Exploded Diagram

[AdminMASTER]

This helps greatly...in identifying whats what...and getting some Euro quotes

[AdminMASTER]

For anyone's curiosity...

"The Model 800 Basic is the cheap alternative for those who want to combine the precision of the technique of the 800 series with versatility .

The full deduction and the compressed air system of the Model 800 series , together with the universal right-left shaft made ​​of solid beech wood , allowing versatility.Of course, the Model 800 Basic with the patented internal absorber and the precise Feinwerkbau sight is equipped .

Cheek piece and cap are adjustable in height and length adjustable with this model. In the rail in the shaft , a sling holder ( optional accessory ) to be attached.

In addition, the model can be 800 Basic numerous matching accessories from the Feinwerkbau - product upgrade ."

PS: Obviously if you want the X lever, make sure the Shop tells Fwb to swap the levers around (no charge ...Im led to believe)

http://www.feinwerkbau.de/de/Sportwaffe ... -800-Basic

[AdminMASTER]

See here new parts catalogue 2014

http://www.feinwerkbau.de/de/Zubeh%C3%B ... einwerkbau

[Jon]

I have loads of 6.6325.010

Valve listed is a generic part that can be fitted to 600 series. Theres two valves used in the P800 so far available.

Reg springs and preload vary one from one reg to another, rarely see two the same and also vary in operating pressure. Depending where you insert a 0.1mm shim will affect pressure by 3bar. If you add 0.1mm shim reg pressure may jump 11bar.

1750.359..1 Transfer port and bolt to barrel seal are worth stocking up. Tip always close the bolt or you may never find the seal again.

[AdminMASTER]

Here is the Fwb 800 Alu - added for comparison as well...

MAJOR components - to order , just quote those numbers (NB: see for Nuts, Bolts, etc... complete PDF > http://www.feinwerkbau.de/de/Service+Do ... eichnungen