credit: http://www.schiesssport-baur.de/Luftgew ... inwerkbau/
Apart from doing a P700 bin parts swap - It proves that most if not all 800, 700 and P70FT alu stocks, actions etc...are all interchangeable...which explains this:
Feinwerkbau 800 aluminum 1.1 VICTORY
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
- Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#2 Re: Feinwerkbau 800 aluminum 1.1 VICTORY
Although different bolt on rear ends since the 600 series the stock fixings are all the same.
There lies the problem the black painted insert casting is usually pretty poor in 2 out of every 3.
There lies the problem the black painted insert casting is usually pretty poor in 2 out of every 3.
If a jobs worth doing, do it right or not at all.
- AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#3 Re: Feinwerkbau 800 aluminum 1.2 VICTORY
Rear Alu stock upgrade - Now called - FEINWERKBAU Model 800 ALU Victory 1.2
PLEASE NOTE - this is a shop "Special" and NOT part of the official line up on the Feinwerkbau website...
"25 YEARS Shooting Sport BAUR - only available at our store!"
So, its still a "parts from bin" using old style front underside stock..
Euro1799 / GBP1658 (Sport Forex 1.085 as Sterling tumbles )
http://www.schiesssport-baur.de/Luftgew ... Y-1-2.html
PLEASE NOTE - this is a shop "Special" and NOT part of the official line up on the Feinwerkbau website...
"25 YEARS Shooting Sport BAUR - only available at our store!"
So, its still a "parts from bin" using old style front underside stock..
Euro1799 / GBP1658 (Sport Forex 1.085 as Sterling tumbles )
http://www.schiesssport-baur.de/Luftgew ... Y-1-2.html
Signature - https://www.instagram.com/pimpmyairgun/?hl=en
Who is online
Users browsing this forum: No registered users and 1 guest