TM1000 - with Fluted barrel

[AdminMASTER]

Credit: http://www.airgunadvice.net/viewtopic.p ... c&start=20

Im either cross eyed...or the air cylinder isnt parallel to the barrel...

Big deal or no big deal ? would have expected perfection...

The owner just needs to confirm with calipers at base, and tip, with cm readings if indeed there is mis-alignment.

[thesmokindog]

You've sent me cross eyed now looking at it for so long - looks off centre to me.

[PolarWolf]

Hard to tell with angled photos, but on the second it does seem to be a bit off center.

[AdminMASTER]

You've sent me cross eyed now looking at it for so long - looks off centre to me.

Ok see here as well: http://www.airgunadvice.net/viewtopic.p ... 1&start=30

" It wouldn't surprise me if the tube was not parallel with the barrel. I built and fitted a regulator for a TM and had problems with the tube. The threads inside the tube were concentric with the outside of the tube but the bore of the tube was not. Because of this, a compromise had to be made with thread engagement vs. 'O' ring clearance.
Dan".

[JEV]

The error may be due to camera lens distortion.

[Conor]

Loving the fluted barrel!

[Conor]

And the two plates of food! Somehow the cylinder alignment doesn't inspire confidence!

[AdminMASTER]

And the two plates of food! Somehow the cylinder alignment doesn't inspire confidence!

Conor,as FT world champion...I would have expected you to have Eagle Eyes.

That first plate isnt food...they are sea shells...for decorative purpose...look closely

[Conor]

Yea, that's the secret to success, the calcium carbonate in the shells is excellent for rangefinding! LOL
Us Irish will eat anything!