UK Working on New Air Gun Restrictions - viewtopic.php?f=169&t=2251 Other https://ukshootingnews.wordpress.com/

TM1000 - with Fluted barrel

User avatar
AdminMASTER
Site Admin
Contact:
Favourite airgun brand ?: Feinwerkbau 800
Country where you live ?: United-Kingdom
Posts: 3167
Joined: Mon Oct 10, 2011 1:13 pm

#1 TM1000 - with Fluted barrel

Sat Apr 14, 2012 12:52 pm

Credit: http://www.airgunadvice.net/viewtopic.p ... c&start=20

Im either cross eyed...or the air cylinder isnt parallel to the barrel...

Big deal or no big deal ? would have expected perfection... :o

The owner just needs to confirm with calipers at base, and tip, with cm readings if indeed there is mis-alignment.
Attachments
tm1000customloopbg.jpg
lhfrontsideintm1000xxl.jpg
wintertuin.jpg
th
thesmokindog

#2 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 2:27 pm

You've sent me cross eyed now looking at it for so long - looks off centre to me.
Po
PolarWolf

#3 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 2:48 pm

Hard to tell with angled photos, but on the second it does seem to be a bit off center.
User avatar
AdminMASTER
Site Admin
Contact:
Favourite airgun brand ?: Feinwerkbau 800
Country where you live ?: United-Kingdom
Posts: 3167
Joined: Mon Oct 10, 2011 1:13 pm

#4 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 2:53 pm

thesmokindog wrote:You've sent me cross eyed now looking at it for so long - looks off centre to me.
:lol: :lol: :lol: :lol: :lol:



Ok see here as well: http://www.airgunadvice.net/viewtopic.p ... 1&start=30

" It wouldn't surprise me if the tube was not parallel with the barrel. I built and fitted a regulator for a TM and had problems with the tube. The threads inside the tube were concentric with the outside of the tube but the bore of the tube was not. Because of this, a compromise had to be made with thread engagement vs. 'O' ring clearance.
Dan".
JE
JEV

#5 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 6:40 pm

The error may be due to camera lens distortion.
Co
Conor

#6 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 10:32 pm

Loving the fluted barrel!
Co
Conor

#7 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 10:34 pm

And the two plates of food! Somehow the cylinder alignment doesn't inspire confidence!
User avatar
AdminMASTER
Site Admin
Contact:
Favourite airgun brand ?: Feinwerkbau 800
Country where you live ?: United-Kingdom
Posts: 3167
Joined: Mon Oct 10, 2011 1:13 pm

#8 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 11:30 pm

Conor wrote:And the two plates of food! Somehow the cylinder alignment doesn't inspire confidence!
Conor,as FT world champion...I would have expected you to have Eagle Eyes.

That first plate isnt food...they are sea shells...for decorative purpose...look closely :lol: :lol: :lol: :lol:
Co
Conor

#9 Re: TM1000 - with Fluted barrel

Sat Apr 14, 2012 11:36 pm

Yea, that's the secret to success, the calcium carbonate in the shells is excellent for rangefinding! LOL
Us Irish will eat anything!

Return to “Rapid Air Weapons (USA - Made to Order)”

Who is online

Users browsing this forum: No registered users and 1 guest

Login · Register

Light/Dark Theme