.png)
Walther LG400 - CZ barrel help
-
messpin
- Go to Rifle: walther
- Country: Turkey
- Where: istanbul
Post
#1 Walther LG400 - CZ barrel help
Can someone help me to find the Measurement to modify the barrel
Mesut Türkoğlu
Walther LG400 Alutech
Konuspro M30
Walther LG400 Alutech
Konuspro M30
-
AdminMASTER
- Site Admin
- Contact:
- Go to Rifle: Feinwerkbau 800
- Country: United-Kingdom
- Where: London
Post
#2 Re: Walther LG400 - CZ barrel help
>> https://airgunaccuracy.wordpress.com/ba ... -velocity/
LG300 - various lengths..
565mm
495mm
425mm
LG400 > 420mm
>> http://cdn.ssusa.org/media/1533534/0313 ... rchive.pdf
LG300 - various lengths..
565mm
495mm
425mm
LG400 > 420mm
>> http://cdn.ssusa.org/media/1533534/0313 ... rchive.pdf
- Attachments
-
-
Jon
- Contact:
- Go to Rifle: JH
- Country: UK
Post
#3 Re: Walther LG400 - CZ barrel help
He may be after the actual fit in to the block, no small task when doing one or two.
Probe has to seal on barrels taper and barrel should be fully back seen dozens with gaps too easy to do that way.
Probe has to seal on barrels taper and barrel should be fully back seen dozens with gaps too easy to do that way.
If a jobs worth doing, do it right or not at all.
Who is online
Users browsing this forum: No registered users and 2 guests